The doi above is for this specific version of this dataset, which is currently the latest. Newer versions may be published in the future. For a link that will always point to the latest version, please use
doi: 10.4121/21401586

Lussenburg, Kirsten; Remi I. B. van Starkenburg; Paul Breedveld (2023): Research data supporting the article "Polishing of metal 3D printed parts with complex geometry: Visualizing the influence on geometrical features using centrifugal disk finishing". Version 1. 4TU.ResearchData. dataset. https://doi.org/10.4121/21401586.v1

Dataset

• Mechanical Engineering
• Manufacturing Engineering
• Engineering

additive manufacturing, centrifugal disk finishing, polishing, selective laser melting

CC0

• Polishing of metal 3D printed parts with complex geometry

RefWorks, BibTeX, Reference Manager, Endnote, DataCite, NLM, DC, CFF

by Kirsten Lussenburg , Remi I. B. van Starkenburg , Paul Breedveld

Parts produced with metal additive manufacturing often suffer from a poor surface finish. Surface finishing techniques are effective to improve the quality of 3D printed surfaces, however they have as downsides that they also slightly change the geometry of the part, in an unpredictable way. This effect on the geometrical features of complex parts has received little attention. In this research, we illustrate a method to visualize the impact of surface finishing techniques on geometrical features, as well as their effectiveness on parts with high shape-complexity, by using centrifugal disk finishing as a case study. We designed and 3D printed test parts with different features using selective laser melting, which were coated with a blue metal lacquer prior to polishing. After polishing, the blue lacquer was eroded away from the spots that were easily reached by the polishing process, yet had remained on the surfaces that could not be reached by the process. We used measurements of material removal and image processing of the remaining blue lacquer on the surfaces to analyze these effects. Using this method, we were able to derive a number of specific design guidelines that can be incorporated while designing metal AM parts for centrifugal disk finishing. We suggest that this visualization method can be applied to different polishing methods to gain insight into their influence, as well as being used as an aid in the design process.

• 2023-12-21 first online, published, posted

4TU.ResearchData

.bmp files in g-zip format, MATLAB code

Polishing of metal 3D printed parts with complex geometry: Visualizing the influence on geometrical features using centrifugal disk finishing

• Interreg 2 Seas programme 2014-2020 (grant code 2S04-014) European Regional Development Fund

TU Delft, Faculty of Mechanical, Maritime and Materials Engineering (3mE), Department of BioMechanical Engineering