The doi above is for this specific version of this dataset, which is currently the latest. Newer versions may be published in the future. For a link that will always point to the latest version, please use
doi: 10.4121/1ce1b3da-ff03-487f-9b9d-592f8dea3c3b

Pierik, Rens; Wouter Grouve; Sebastiaan Wijskamp; Remko Akkerman (2023): Supplementary data for the paper: Modeling the effect of temperature and pressure on the peak and steady-state ply-ply friction response for UD C/PAEK tapes. Version 1. 4TU.ResearchData. dataset. https://doi.org/10.4121/1ce1b3da-ff03-487f-9b9d-592f8dea3c3b.v1

Dataset

• Mechanical Engineering
• Manufacturing Engineering
• Aerospace Engineering
• Materials Engineering
• Engineering

hot press forming, material modeling, ply-ply friction, thermoplastic matrix composites

CC BY 4.0

• The "PERFECT" data collection. Characterization and validation data for forming simulations with unidirectional thermoplastic composite materials.

RefWorks, BibTeX, Reference Manager, Endnote, DataCite, NLM, DC, CFF

by Rens Pierik , Wouter Grouve , Sebastiaan Wijskamp , Remko Akkerman

The dataset contains supplementary data for the accepted paper: 'Modeling the effect of temperature and pressure on the peak and steady-state ply-ply friction response for UD C/PAEK tapes' to be published in Composites Part A: Applied Science and Manufacturing. The dataset consists of ply-ply friction tests for UD C/PEEK and C/LM-PAEK tape in melt using a purpose-built friction tester, which simulates the response during actual hot press forming of thermoplastic matrix composites. Typically, the material response exhibits a peak followed by a steady-state friction depending on the applied rate. A range of sliding rates was measured at constant temperature and normal pressure conditions to construct a flow curve of the peak and steady-state shear stress versus applied rate, showing the rate-dependency in a comprehensible manner. Different temperature and normal pressure conditions were considered to investigate the effect of temperature and normal pressure on the friction response. The experimental procedure is outlined and an overview of the used specimens with the test conditions is provided. Our modeling work to predict the peak and steady-state friction for UD TPC tape in melt as presented in an earlier publication (DOI: 10.1016/j.compositesa.2022.107185) is extended to include the effect of temperature and normal pressure. The dataset includes the scripts for the shear flow model as well as the required matrix viscosity data. The Matlab scripts are named according to the figures as shown in the mentioned paper.

• 2023-07-12 first online, published, posted

4TU.ResearchData

.txt/.lvm (experimental data), .m/.mat (scripts, analyzed data), .pdf (supporting information)

• https://doi.org/10.1016/j.compositesa.2022.107185

• Dutch Research Council (NWO), MaterialenNL research program, project nr.: 17880

University of Twente, Faculty of Engineering Technology, Chair of Production Technology;
ThermoPlastic composites Research Center (TPRC)