The doi above is for this specific version of this dataset, which is currently the latest. Newer versions may be published in the future. For a link that will always point to the latest version, please use
doi: 10.4121/ee651378-82a8-4cf3-bbbb-3237dd1e380d

Pantoji, Siddharth ; Peeters, Daniel; Kassapoglou, Christos (2024): Experimental Dataset about Manufacturing Process Variations in Automated Fiber Placement Composites. Version 2. 4TU.ResearchData. dataset. https://doi.org/10.4121/ee651378-82a8-4cf3-bbbb-3237dd1e380d.v2

Dataset

x choose version: version 1 - 2024-10-14

• Aerospace Engineering
• Engineering

Automated fiber placement, robot accuracy, tow lateral movement, width variation

July 2023

CC BY-NC 4.0

RefWorks, BibTeX, Reference Manager, Endnote, DataCite, NLM, DC, CFF

by Siddharth Pantoji , Daniel Peeters , Christos Kassapoglou

An experimental setup involving various sensors mounted on an AFP head was implemented to simultaneously measure the sources of manufacturing variations

in AFP composites. The measurements were made during the layup to investigate the relative significance of these sources. The experimental setup consisted of an AFP head instrumented with a laser tracker, a camera and laser line scanners. Each of these sensors measured a particular source of variation. The laser tracker measured robot accuracy. The camera measured tow lateral movement. The laser line scanners measured the width of the tow before and after compaction.

This dataset contains the measured data from the sensors mentioned above. A readme file explains the file structure of the dataset.

• 2024-10-14 first online

• 2024-10-21 published, posted

4TU.ResearchData

.tiff, .mat, .csv, .xiseq, .src

Predicting gaps and overlaps in automated fiber placement composites by measuring sources of manufacturing process variations

TU Delft, Faculty of Aerospace Engineering, Department of Aerospace Structures and Materials.
SAM XL - Smart Advanced Manufacturing, Delft, The Netherlands.