Dataset underlying the publication: All-lignin polyelectrolyte multilayers as renewable and biodegradable nanofiltration membranes

doi:10.4121/afcd7ef6-4b2b-402f-a406-9ff559eabc83.v1
The doi above is for this specific version of this dataset, which is currently the latest. Newer versions may be published in the future. For a link that will always point to the latest version, please use
doi: 10.4121/afcd7ef6-4b2b-402f-a406-9ff559eabc83
Datacite citation style:
de Vos, Wiebe M.; Regenspurg, Jurjen; Wurm, Frederik; Peil, Stefan; Jonkers, Wendy et. al. (2023): Dataset underlying the publication: All-lignin polyelectrolyte multilayers as renewable and biodegradable nanofiltration membranes. Version 1. 4TU.ResearchData. dataset. https://doi.org/10.4121/afcd7ef6-4b2b-402f-a406-9ff559eabc83.v1
Other citation styles (APA, Harvard, MLA, Vancouver, Chicago, IEEE) available at Datacite
Dataset

The data includes the following datasets:


dn_dc_for_Q_factor_determination: refractive indexes of lignin solutions measured at different concentrations (g/L) of lignin at different wavelengths (nm) of incoming light. The linear fit function in excel was used to determine the dn/dc from the presented data. The fit data can be found in the SI of the article.


Filtration: Contains experimental results of crossflow filtration measurements for pure water permeability, 90% molecular weight cut off (MWCO) data based on polyethylene glycol (PEG) retentions (100-10000 g/mol) as measured by Gell permeation chromatography (GPC), and MgSO4 retention data. Measured quantities are: active fibre length (m), average [inlet and outlet] pressure (bar), permeate mass (g) [filled beaker-empty beaker], permeation time (s), feed and permeate conductivity (microS/cm).


Fourier transform infrared spectroscopy data (FTIR): From the 3 different cationic lignin batches used in the article, the lignosulfonates and the unmodified Kraft lignin. batch number 1 was used for figure 2 in the article; batch number 2 was used for the salt stability, pH stability and biodegradability experiments (Figure 4, 5 and 6 of the main article and figure S4, S6, S7 and S9 of the SI); batch number 3 was used for the reflectometry and layer growth experiments at different NaCl concentrations (figure 3 in the article). the wavelength (cm-1) and signal intensity (a.u.) are presented.


H-NMR: 1H-NMR data of the different cationic lignin batches, lignosulfonate and unmodified Kraft lignin. The chemical shift (ppm) and signal intensity (a.u.) are presented


P-NMR: 31P-NMR data of the unmodified Kraft lignin and lignosulfonate. To calculate the OH content of the lignin from this data the MestreNova software was used. The chemical shift (ppm) and signal intensity (a.u.) are presented


SEM: FESEM images of the bare support and the support coated with 9.5 or 10.0 bilayers of lignin


Reflectometry: Reflectometry data for the lignins coated from 5, 50 and 500 mM NaCl solutions onto a silicon waver. The Q factors as determined from the dn/dc data and the professor Huygens software are presented together with the signal (S) base signal (So) and calculated adsorption (Ads) in mg/m2.


history
  • 2023-11-22 first online, published, posted
publisher
4TU.ResearchData
format
csv, xlsx, PNG
funding
  • NWO: perspectief AquaConnect (grant code TTW P19-45) NWO
organizations
University of Twente, Membrane Surface Science, Membrane Science and Technology, MESA+ Institute of Nanotechnology;

University of Twente, Sustainable Polymer Chemistry, Department of Molecule and Materials, MESA+ Institute of Nanotechnology

DATA

files (1)